3DVision invites you to register for the Central Indiana SolidWorks User Group (CISUG) Meeting Thursday, May 16th. There will be a technical presentation on SolidWorks Advanced Modeling. The event will take place from 5 – 8pm and there will also be food provided sponsored by SWUGN.
The event will be hosted at:
ZIPP Speed Weaponry
5315 Walt Place
Indianapolis, IN 46254
For more information or to RSVP for the event, please email Peter Fischer.
3DVision Technologies is proud to announce we will be presenting at the VWR International Fair in Conjunction with the Procter and Gamble Measurement COP Symposium. The event will take place Tuesday, April 30th from 11:00am – 3:00pm.
The event will be an in-house gathering for the researches who are in key measurement gathering roles. The show is open to all P&G Researches at the Mason Business Center.
3DVision invites you to register for the SolidWorks Louisville User Group (SLUG) Meeting Wednesday, April 10th. The event will take place from 6:30pm – 8:30pm and there will also be food provided.
The meeting will be held at:
University of Louisville
Henry Vogt Engineering Center
3rd and Eastern Parkway
Louisville, Kentucky 40292
For more information, or to RSVP for the event please email Paul McCrorey.
DriveWorks is proven technology that reduces the time and money consumed on custom product design and support. DriveWorks lets you automate repetitive tasks and generates all the design and manufacturing output required.
There are several good reasons why companies want to automate what they do:
The Benefits of DriveWorks
To learn more about DriveWorks click here.
3DVision is proud to offer a series of SolidWorks Simulation events that will be sure to teach you a thing or two.
Have you seen our Simulation webinars, and are intrigued about how easy the Simulation products are to use? Or have you always been curious about SolidWorks Simulation and just want to test drive it? Come and experience the product first-hand as one of our Simulation experts lead you step-by-step through setting up different types of analysis.
You will:
As you experience this FREE learning session, you will be able to relate its usage to your design situations.
This series of events will be offered at FOUR different dates and locations during the month of April:
April 2, 2013
Cincinnati, Ohio
8:30am – 12:00pm
Click here to register
April 4, 2013
Dayton, Ohio
8:30am – 12:00pm
Click here to register
April 9, 2013
Columbus, Ohio
8:30am – 12:00pm
Click here to register
April 18, 2013
Louisville, Kentucky
8:30am – 12:00pm
Click here to register
We hope to see you during this Simulation Series. You are welcome to bring along a sample of your product and show it to our experts so that they can comment on how they would tackle your engineering challenges.
This Saturday, March 9th 3DVision’s 3D Printing Specialist Ginger Ruddy will be presenting at a 3D printing event being hosted at Louisville’s Free Public Library. The event will explore the basics of 3D printing and include instructional stations for kids, entrepreneurs, inventors, crafters and more.
This event is a joint project of the Louisville Free Public Library and the Louisville Digital Association.
The event will include:
The event will be hosted at:
Louisville Free Public Library
301 York Street
Louisville, KY 40203
So stop by and visit 3DVision’s Ginger Ruddy in her booth for a presentation on Fused Deposition Modeling (FDM).
If you have any other questions regarding the event feel free to email her.
3DVision invites you to register for the Greater Evansville Area SolidWorks User Group (GEASWUG) Meeting Thursday, March 21st. If you do not attend any other meetings, this is the one you DO NOT want to miss! There will be some very special guests that you will want to meet. The event will take place from 5 – 8pm and there will also be food provided.
The event will be hosted at:
Berry Plastics Corporation
101 Oakley St
Evansville, IN 47710
For more information or to RSVP for the event, please click here.
3DVision invites you to register for the Central Indiana SolidWorks User Group (CISUG) Meeting Wednesday, March 20th. If you missed SolidWorks 2013, there will be a general meeting over what you might have missed. There will also be a technical presentation on SolidWorks Plastics. The event will take place from 5 – 8pm and there will be food provided sponsored by SWUGN.
The event will be hosted at:
Wabash National Corporation Innovation Center
3233 Kossuth Street
Lafayette, IN 47904
For more information or to RSVP for the event, please email Peter Fischer.
DriveWorks webinars are proven to help greatly reduce the learning curve for SolidWorks. Join a few webinars in March to become more efficient with your automations and save countless hours of your time in the future.
DriveWorks Xpress Head Start Webinar
You will learn…
You will see how you can start automating YOUR designs straight away.
Register here for the March 5th webinar from 11:00am – 12:00pm
DriveWorks Solo Head Start Webinars
DriveWorks Solo Headstart Webinars are led by Certified DriveWorks Solo Application Engineers and are a great way to demonstrate how to Get Started with the Software! You will be taken through the quick and easy steps involved in automating your design process with DriveWorks Solo.
You will learn:
1 hour of your time today learning how to set up the software will save you countless more in the future!
Register here for the March 6th webinar from 11:00am – 12:00pm
Register here for the March 20th webinar from 11:00am – 12:00pm
DriveWorks Solo Training Part 1
In this session we will be going over the start of the DriveWorks Solo Training.
This will include:
Register here for the March 25th webinar from 11:00am – 12:00pm
DriveWorks Solo Training Part 2
In this session we will be going over the middle section of the DriveWorks Solo Training.
This will include:
Register here for the March 26th webinar from 11:00am – 12:00pm
DriveWorks Solo Training Part 3
In this session we will be going over the end of the DriveWorks Solo Training.
This will include:
Register here for the March 27th webinar from 11:00am – 12:00pm
3DVision invites you to register for the Northern Indiana SolidWorks User Group (NISWUG) Meeting Tuesday, March 12th. The event will take place from 5 – 8pm and there will also be food provided.
The meeting will be hosted at:
Lake Michigan College
1905 Foundation Drive
Niles, MI 49120
Room 108A
For more information or to RSVP for the event please email niswug.info@gmail.com
When you RSVP, please provide your name, title and company name to update their email address list.
RSS
You are currently browsing the archives for the 3DVision Technologies Announcements category.
![[Valid RSS]](http://www.3dvision.com/wordpress/wp-content/themes/default/valid-rss.png "Validate my RSS feed"){kind=small}
