3DVision Technologies is proud to announce we will be presenting at the VWR International Fair in Conjunction with the Procter and Gamble Measurement COP Symposium. The event will take place Tuesday, April 30th from 11:00am – 3:00pm.
The event will be an in-house gathering for the researches who are in key measurement gathering roles. The show is open to all P&G Researches at the Mason Business Center.
This Saturday, March 9th 3DVision’s 3D Printing Specialist Ginger Ruddy will be presenting at a 3D printing event being hosted at Louisville’s Free Public Library. The event will explore the basics of 3D printing and include instructional stations for kids, entrepreneurs, inventors, crafters and more.
This event is a joint project of the Louisville Free Public Library and the Louisville Digital Association.
The event will include:
The event will be hosted at:
Louisville Free Public Library
301 York Street
Louisville, KY 40203
So stop by and visit 3DVision’s Ginger Ruddy in her booth for a presentation on Fused Deposition Modeling (FDM).
If you have any other questions regarding the event feel free to email her.
3DVision invites you to attend the Central Indiana SolidWorks User Group (CISWUG) meeting on Wednesday, January 16th. The meeting will host 3DVision’s own Randy Simmons as a special guest speaker.
Randy has been a 3DVision instructor since 2003. He has a B.S. in Mechanical Engineering from Wright State University and is a Certified SolidWorks Elite Application Engineer as well as a Certified SolidWorks Expert.
During the January 16th event, Randy will be giving a presentation around 6:30pm on ‘SolidWorks Electrical’. He is very knowledgeable of SolidWorks and will be open to any questions after his presentation.
The event will be hosted at:
Capital Industries
1677 W. 400N
Shelbyville IN, 46176
(888) 900-8245
For more information or to RSVP for the event email Peter Fischer at Peter@Fischweb.net
On Tuesday, August 21st the Greater Cincinnati SolidWorks User Group will host our veryown, Jeff Sweeney Engineering Data Specialist at 3DVision, as a special guest speaker.
Jeff has been a 3DVision instructor since 2006. He has a BS degree in Agricultural Engineering and has had over 14 years experience with the Manufacturing of CAD as well as over 10 years experience with Automation Design. He has SolidWorks Certifications in CSW Expert, Enterprise PDM Support Technician 2010-2011, Enterprise PDM Professional, SolidWorks Instructor and PDMWorks Workgroup Support Technician 2006-2007.
During the August 21st event, Jeff will be speaking on the full suite of DriveWorks and all of its capabilities. Jeff is very knowledgeable with DriveWorks as well as SolidWorks Enterprise PDM and will be open to any questions after his presentation.
The event will be hosted at Cryogenic Equipment & Services, 11959 Tramway Drive
Cincinnati, OH 45241 from 5:30-8:15pm. To register for this event please contact Ed Scheid atgcswup@gmail.com
Google Currents is a free publication application that allows you to deliver magazine-like editions to your phone or tablet. It’s extremely fast and available anywhere with offline reading. Your favorite blogs and feeds are instantly uploaded onto Google Currents providing a reading experience unlike any other. 3DVision has utilized this application to display our website on the go. As a subscriber to 3DVision’s Google Currents page you can access our information anywhere.
In the image below you can see that you’re able to access everything from Contact information in the About Us section, to a list of our Course Descriptions in the Training section, to even our YouTube and Blog channels that our constantly updated with the live feed feature from Google Currents.
The Google Currents application is a great way to stay connected to 3DVision everywhere you go with our information at the palm of your hand. Our entire website has been uploaded onto the Google Currents application and gives our subscribers the ability to navigate through our website with either their phone or tablet.
In the picture below you can see three pages describing Simulation Services. All three images are clickable and describe Simulation Services exactly as that our actual website does.
If you’re the tech guru that must have every application then Google Currents is a must have application for you. All of your favorite magazines and websites are already on Google Currents and don’t forget to subscribe to 3DVision!
Directions to subscribe:
1. To subscribe to 3DVision’s Google Currents application download the Google Currents application on your cell-phone or tablet.
2. After downloading the application head over to: http://bit.ly/LYPh39 on your computer.
3. If you don’t already have a Google account, head over to: www.google.com on your computer and set up one.
4. After your account is set up sign in to Google in the upper right hand corner.
5. Click Subscribe to this edition.
6. On your phone or tablet open the Google Currents application.
7. Your phone/tablet should have automatically synced 3DVision’s Currents and if you swipe left it should be stored in your library.
Join us for one or more of this month’s featured webinars.
Each webinar is free and will feature a specialized 3DVision Technical Expert. For the full list of upcoming 3DVision events, Click Here.
Dynamic Balancing of Machinery
When: February 7, 2-3pm EST
What: Webinar
Rotating imbalance is a common source of vibration. In this webinar you will learn how to simulate this imbalance on rotating components using SolidWorks Motion. This imbalance can be graphed out over time or cycles. Design changes can be implemented using SolidWorks configurations, and the effect of these changes can be studied by duplicating studies.
To register for this free event, Click Here.
An Introduction to the Simulation Suite in SolidWorksWhen: February 17, 10 – 11am EST
What: Webinar
Do you constantly face engineering challenges and product quality issues? Are you fighting a lot of ECOs and warrenty battles? If so, come join us on a one hour introductory presentation on how to leverage functionality within SolidWorks that have helped a lot of companies score in these areas. Learn how much traditional analysis has progressed, and how it is no longer a specialist’s forte, but a tool that every engineer should have and use.
To register for this free event, Click Here.
Surfacing – Advanced Modeling TechniquesWhen: February 21, 9 – 10am
What: Webinar
Have you already mastered the basic SolidWorks modeling tools? Are you looking to take your modeling skills to the next level? Sign up for this webinar to break down the mysterious wall of surfacing modeling and learn practical tricks that you’ll be able to utilize on a daily basis.
To register for this free event, Click Here.
Solving Valve Problems using CFDWhen: February 28, 10 – 11am EST
What: Webinar
Join us for a webinar where we explore how to build a virtual flow bench to monitor the above parameters right inside SolidWorks. Leveraging the power of configurations and easy flow setups, the audience will learn how to determine these critical values in hours without building a single prototype.
To register for this free event, Click Here.
3DVision Technologies is committed to providing engineers, designers and their design teams with the products and solutions needed to design some of the world’s greatest products. For more information on 3DVision Technologies full suite of products and solutions visit us at www.3dvision.com or call us at 1-800-745-3136.
The new uPrint SE 3D Printers are powered by Stratasys’ patented FDM (Fused Deposition Modeling) technology. It’s the 3D printer on which thousands of design engineers test their designs.
uPrint SE 3D Printers build accurate, stable 3D models in ABSplus plastic. They’re ideal for determining form, fit and function in everything from ergonomics to manufacturing processes. These aren’t fragile lab beauties either. ABSplus is stronger than materials typically used by competitive 3D printers.
By producing models in house or Shanghai Housing instead of outsourcing to a service bureau, you can keep your most ground-breaking product designs confidential.
With the uPrint SE 3D Print Pack you get everything you need to start printing immediately. No hidden costs. Nothing more to consider. Just un-box and print.
The uPrint SE 3D Print Pack includes everything you need to start making durable, accurate 3D models in ABSplus plastic.
The uPrint SE 3D Print Pack includes:
- uPrint SE 3D Printer
- WaveWash Support Cleaning System
- Start-up Kit
With prices starting at $15,900 companies are now able to take advantage of low monthly lease payments for less than $300. For many organizations, this monthly lease payment requires no capital expenditure approvals and is less than purchasing a single part build from a service bureau.
To learn more about the new uPrint SE Print Pack, click here for more information.
3DVision Technologies wants to alert you to important 4th quarter tax planning implications – to take advantage of by the end of this month.
What is Section 179?Essentially, Section 179 of the IRS tax code allows businesses to deduct the full purchase of qualifying equipment and/or software purchased of financed during the 2011 tax year. That means if you buy (or lease) a piece of qualifying equipment, you can deduct the full purchase price from your gross income.
What Software Qualifies?
For basic eligibility, software must meet all the following general specifications:
- The software must be financed or purchased outright.
- The software must be used in your business or income-producing activity.
- The software must have a determinable useful life.
- The software must be expected to last more than one year.
Section 179 does come with limits – there are caps to the total amount written off. For more specific details visit www.section179.org
The bottom line is, if you are thinking of purchasing software, now is a great time to take advantage of the tax benefits.
Streaming video for the entire “What’s New in SolidWorks 2012″ is available from our website!!
If you weren’t able to make it to one of our many local live events or you would like to pass it on to your colleagues to review, it is available here:
http://www.3dvision.com/solidworks-products/3d-design
Enjoy !
Well it has just been announced where SolidWorks World 2012 will be.
It’s going to be February 13th thru the 15th.
I’ll give you some hints on the location:
Tired of guessing? Well the location for SolidWorks World 2012 is….
San Diego, California!!!
I look forward to seeing everyone there.
(source for data: Wikipedia)
RSS
You are currently browsing the archives for the 3DVision Technologies Company News category.
![[Valid RSS]](http://www.3dvision.com/wordpress/wp-content/themes/default/valid-rss.png "Validate my RSS feed"){kind=small}
